Open-Cup Flash Point Tester, Open Flash Point Tester, Asphalt Flash Point Asphalt Flash Point & Burning Point Meter

Heating device: Quartz tube furnace heating, no fire, explosion prevented The power is adjustable from 0W to 600W This is 220V, when using the equipment, carefully read the technical manual, familiar with the technical indicators, work performance, use methods, precautions, and strictly follow the steps specified in the instrument manual. It is applicable to all petroleum products with flash points above 79degree and below 400degree except fuel oils. Specifications: Cleveland Open-Cup Flash Point Tester SYD-3536 220V Power supply: AC(220±10%)V/50Hz Thermometer: (-6~400)degree Test flame applicator: It applies the test flame automatically Ambient temperature: (-1050)degree Igniting device: (1) Ignition source: coal gas Flame diameter is 3.2mm~4.8mm Maximum power consumption: 650W Relative humidity: 85% Dimension: 350mm?90mm?50mm (thermometer is not included) Rated voltage (appliances or chargers): AC110-240/50HZ;

• When the temperature reaches 28 °C before the expected flash point, the flame of the igniter is swept once every 2 °C along the center of the test cup with a radius of 150 mm. The elapsed time is about 1 s.
• Application: Suitable for most of lubricating oil,heavy oil and non-volatile dark oil, etc
• The instrument is fully self-contained complete. The stainless steel working table and furnace shell make it beautiful and elegant. The operator can do determination as long as connecting with coal gas or other civil gas.
• Quartz tube electric furnace heating, no flame, explosion-proof, power 0 ~ 650W continuous adjustable. Pure copper heating pot. It equipped with flame extinguishing cover which accord w/requirements of test.
• Start heating the sample at a rapid rate of 14 ° C / min -17 ° C / min, when the temperature reaches 56 ° C before the expected flash point, reduce the heating rate, the speed is controlled at 5.5 ° C / min 0.5 °C before the flash point °C/min.